Qingdao Jyhoto Eco Technology Development Co., Ltd.
Customer utmost , Honesty first !
Add to Cart
3.5mm Marble Waterproof Vinyl Flooring Click Lock Easy to Install
Product Introduction
Water Proof vinyl plank flooring is a new product that was enter the market just a few years ago to provide the best of both worlds’ solution between Luxury Vinyl Floorings and Laminate Floorings. Waterproof Vinyl is unaffected by water but tends to conform to irregular sub floors without any underlayment and can also be adversely affected by direct sunlight. XMY waterproof vinyl floor has a rigid core similar to Laminate but with its plastic composite, it is unaffected by water. It is also far more resistant to expansion and contraction from direct sunlight than LVT flooring. It it perfect combination of nature and technology and will just fit every corner of your house.
Specifications
XMY vinyl flooring offers a range of Vinyl plank options.
1. floor tile sizes include the following range of sizes: 6" x 36" 9" x 36" ; 9" x 48" ; 7" x 48"; 8" x 48"
2. Other special sizes will be produced according to customer's demand.
3. Thickness ranges from 3 mm to 7 mm
4. Wear layer film ranging from 0.3mm to 0.7 mm.
Packing Qty
|
Description |
Specification | Thickness | wear layer | Qty/ctn | Qty/Pallet | Qty/ 20GP |
|
Waterproof Vinyl Flooring
|
6" * 48" | 3.2mm | 0.55mm | 17pcs/ctn | 20ctns/Pallet | 2923 Sqm |
|
Waterproof Vinyl Flooring
|
6" * 48" | 3.5mm | 0.55mm | 16pcs/ctn | 20ctns/Pallet | 2714 Sqm |
|
Waterproof Vinyl Flooring
|
6" * 48" | 4.0mm | 0.55mm | 14pcs/ctn | 20ctns/Pallet | 2375 Sqm |
|
Waterproof Vinyl Flooring
|
6" * 48" | 5.0m | 0.55mm | 11pcs/ctn | 20ctns/Pallet | 1900 Sqm |
Installation Preparation and Steps
Installation is as easy as clicking the planks together. The tongue and groove design on each plank allows for the most natural, wood-like connection.
Finish your project off with accessories and a care kit! Enjoy the beauty of natural wood in your space
Helpful tips:
Once you are ready to install, start in a corner. Connect planks in a lengthwise pattern. Once you finish a row, cut the last plank and use what is left to start the next row. Continue this pattern until your space is complete. When cutting laminate planks, cut away from your project area to avoid getting saw dust in the locking systems. Any saw is acceptable to use as long as it leaves a clean cut.
1. Remember to leave a ¼ inch expansion gap around the perimeter of your room to give your floor space to adjust to temperature changes naturally.
2 .Depending on your subfloor, your project may require a particular type of underlayment. Actually you can apply the vinyl flooring without underlayment.
3. Remove all obstructions, floor coverings, and moldings in your project area prior to starting installation.
4. Before you open any vinyl flooring boxes, let your floor acclimate to its new environment for at least 48 hours.
5. When installing, open a few boxes at a time and take planks at random from a number of boxes. This will give your floor the most natural wood look.